73 lines
2.5 KiB
Python
73 lines
2.5 KiB
Python
|
"""
|
|||
|
|
Tan mingyan
|
|||
|
|
2026/3/9
|
|||
|
|
|
|||
|
|
oc 驱动示例（bus_oc.py）—— 补充参考
|
|||
|
|
"""
|
|||
|
|
# midware/drivers/bus_can.py
|
|||
|
|
from .base_driver import BaseBusDriver
|
|||
|
|
from typing import Optional, Dict, Any
|
|||
|
|
from loguru import logger
|
|||
|
|
import time
|
|||
|
|
|
|||
|
|
class BusOCDriver(BaseBusDriver):
|
|||
|
|
"""uart总线驱动实现（适配）"""
|
|||
|
|
def _init_config(self):
|
|||
|
|
self.config.setdefault("channel", 0) # CAN通道
|
|||
|
|
self.config.setdefault("baudrate", 500000) # 500kbps
|
|||
|
|
self.config.setdefault("frame_format", "standard") # 标准帧/扩展帧
|
|||
|
|
logger.info(f"UART驱动配置初始化完成：{self.config}")
|
|||
|
|
|
|||
|
|
def connect(self) -> bool:
|
|||
|
|
try:
|
|||
|
|
# 实际逻辑：打开CAN通道
|
|||
|
|
time.sleep(0.05)
|
|||
|
|
self.is_connected = True
|
|||
|
|
logger.info("CAN总线连接成功")
|
|||
|
|
return True
|
|||
|
|
except Exception as e:
|
|||
|
|
logger.error(f"CAN总线连接失败：{str(e)}")
|
|||
|
|
return False
|
|||
|
|
|
|||
|
|
def disconnect(self) -> bool:
|
|||
|
|
try:
|
|||
|
|
self.is_connected = False
|
|||
|
|
logger.info("CAN总线断开成功")
|
|||
|
|
return True
|
|||
|
|
except Exception as e:
|
|||
|
|
logger.error(f"CAN总线断开失败：{str(e)}")
|
|||
|
|
return False
|
|||
|
|
|
|||
|
|
def send(self, data: bytes, **kwargs) -> bool:
|
|||
|
|
if not self.is_connected:
|
|||
|
|
logger.error("CAN驱动未连接，发送失败")
|
|||
|
|
return False
|
|||
|
|
|
|||
|
|
try:
|
|||
|
|
frame_id = kwargs.get("frame_id", 0x123) # CAN帧ID
|
|||
|
|
is_extended = kwargs.get("is_extended", False) # 是否扩展帧
|
|||
|
|
logger.info(
|
|||
|
|
f"CAN发送数据｜帧ID：0x{frame_id:X}｜扩展帧：{is_extended}｜"
|
|||
|
|
f"数据：{data.hex()}｜长度：{len(data)}字节"
|
|||
|
|
)
|
|||
|
|
# 实际逻辑：调用CAN驱动发送接口
|
|||
|
|
return True
|
|||
|
|
except Exception as e:
|
|||
|
|
logger.error(f"CAN数据发送失败：{str(e)}")
|
|||
|
|
return False
|
|||
|
|
|
|||
|
|
def recv(self, timeout: float = 0.1, **kwargs) -> Optional[bytes]:
|
|||
|
|
if not self.is_connected:
|
|||
|
|
logger.error("CAN驱动未连接，接收失败")
|
|||
|
|
return None
|
|||
|
|
|
|||
|
|
try:
|
|||
|
|
# 模拟接收
|
|||
|
|
time.sleep(0.001)
|
|||
|
|
# mock_data = b"\x11\x22\x33\x44"
|
|||
|
|
# logger.debug(f"CAN接收数据：{mock_data.hex()}")
|
|||
|
|
# return mock_data
|
|||
|
|
return None
|
|||
|
|
except Exception as e:
|
|||
|
|
logger.error(f"CAN数据接收失败：{str(e)}")
|
|||
|
|
return None
|